Guide: How to Disconnect a Spray Hose from a Delta Faucet (2023)

This post may contain affiliate links. If you use these links to make a purchase, we may earn a small commission. Thank you very much.

Delta's extensive range of faucets has made them a top supplier, and it is their use of retractable sprinkler hoses that sets them apart from their competitors.

However, the spray hose is often the source of complications such as leaks and may need to be disconnected for replacement.

If you're wondering how to disconnect a spray hose from a Delta faucet, you've come to the right place.

In this article, we provide a step-by-step guide to the disconnection process that will save you the hassle and expense of hiring a professional plumber.

You can save a lot of time and money by doing this yourself.

How does the faucet sprinkler system work?

Before successfully carrying out the process, you must first understand the connection between the faucet and the shower hose, that is, how the faucet shower system works.

It is important to note that most faucets are sold with the spray attached directly and the spray is powered by water pressure and gravity. The parts are not visible, they are hidden under the sink or in the body of the hose.

You'll find the working end of the sprayer inside the hose. Water enters the sprinkler hose from below after passing through the faucet. A diverter is included at the base of the hose; This is a plastic collar that is placed inside the hose when you open the faucet controller.

Releasing the sprinkler trigger means the water supply to the sprinkler head cannot exit the nozzle, causing the collar to rise to accommodate backflow. For the sprayer to work, the tap must be open; Note that the spout can be closed by pressure changing the direction of water flow.

Which Delta kitchen faucets have a shower hose?

Now that you have a better understanding of the relationship between the faucet and the spray hose, you should be able to disconnect the sprayer with ease. However, before you start removing the sprinkler head, it's important to identify the type of faucet you're working with.

The Delta kitchen style faucet comes in three main types, each equipped with a shower hose. It is important to point out whichDelta type kitchen faucetYou have, because this knowledge will help you carry out the procedure.

Two handle head set model

• It can be recognized by its distinctive set of two handles.
• It has faucet and shut-off controls located along the sink.
• The vegetable sprayer can be found, as well as the faucet and valves.

generalized kitchen faucet

• It can be recognized by its unique handle.
• Unlike the kitchen faucet in the basic set, it has a separate vegetable sprayer.

Pull-out kitchen mixer tap

• Comes with a single sleeve.
• The difference here is that the faucet spout and the vegetable sprayer head are connected.

Identifying the faucet style is the first step to a successful procedure. If you've never tried to disconnect the syringe tube before, familiarizing yourself with the model is a good place to start.

Disconnecting the sprayer hose can seem like a daunting task at first, but it's actually relatively easy once you know the right tools. It is recommended that you gather all your tools before you begin; so you have them all handy when you need them.

All tools and replacement parts can be found at the hardware store, although it's always good to check that you already have them before you buy. Professional plumbers use the same tools when carrying out the procedure, but doing the job yourself can save you a lot of money.

You will need a new spray head and spray hose to replace the defective parts and an adjustable wrench to help you loosen the spray hose nuts. A sink faucet may also be needed if your sink design calls for it.

It is also important to have pliers handy as they come in handy when tightening the rod connection. A screwdriver will help you remove the spray head, while a pocket knife can help you remove the C-clip.

To successfully complete the procedure, you need to be able to see what you are doing under the sink. Therefore, a flashlight is an indispensable tool in this process, which allows you to focus all your attention on the task at hand.

You will need:

• a new spray head and spray hose to replace the defective parts
• an adjustable wrench to loosen the spray hose nuts
• a sink faucet if the sink design requires it
• a tweezers; These are useful when tightening the socket joint
• a screwdriver to help remove the sprinkler head
• a pocket knife to help you remove the C-clip.
• a flashlight to help you see under the sink.

Steps to Disconnect a Spray Hose from a Delta Faucet

1. Disconnect the water supply lines and drain the water

Turn off the water valve controller to shut off the water supply. The task is not only impossible with the valves open, but also extremely inconvenient, as you will be covered in water.

Drain the remaining water from the syringe nozzle and hose. This can be done by triggering the sprayer, which will make it easier to loosen the nuts. Place a bucket under the spray hose to catch any drops that fall as you work.

2. Loosen the nuts and disconnect the hose.

Identify the spout under the sink and find the connecting spray hose. If you find a clip connecting the hose and tube, you will need to remove it and put it away.

Set a bucket to drain the water in the hose and loosen the nuts. Use the adjustable wrench to complete this step and turn it counterclockwise until the nuts come loose and you can pull them apart by hand. In the case of a bolted connection, loosen the nuts with a washbasin wrench if necessary.

After unscrewing the nuts, you can now disconnect the shower hose from the Delta union. Simply loosen the deck adjustment nut with a screwdriver and remove it from the opposite side.

3. Remove the spray head

Turn the union nut counterclockwise and the sprinkler will disengage from the hose.

An older spray head may have mineral deposits. If that's the case, water and white vinegar can be mixed into a cleaning solution. Dipping the head in the solution facilitates removal. After that, you can simply detach the spray head and store it away for safekeeping.

With a pull-out tap, you need to bend the spray hose after pulling it out. With an easily detachable connection, the sprinkler can be disconnected with the push of a button.

4. Check for leaks and replace defective parts

Check hose and spray head for signs of leaks orfaucet corrosion. If you find a leak at the rod joint, use a wrench or pliers to tighten it. However, if the leak persists, it is recommended to replace the spray hose.

You can order replacement parts if the key warranty is valid. To do this, contact the provider's customer service team directly. However, if the warranty has expired, you will have to buy the parts yourself. Take the broken pieces to the hardware store and buy an identical model.

5. Reassemble and reattach the spray head

Now that you know how to disconnect the spray hose from the Delta faucet, it's time to put it back together!

After removing the spray hose assembly and purchasing replacement parts or a new spray hose, you can now install the replacement deck attachment where the old one used to be. Use a screwdriver to secure it with nuts under the sink and insert the spare shower hose into the deck fitting.

Reconnect while wrapping the male threads with duct tape and attach the hose to the faucet stem to complete the process. By following the correct steps with the best tools for the job, you will now be able to disconnect the spray hose from the Delta Faucet.

final thoughts

Now that you know how to disconnect the shower hose from the Delta faucet, the next time you have problems with your showerheads or leaks at the base, you might want to try it yourself.

You can't go wrong by following our guide, but don't hesitate to contact a plumber if you're not sure how to do the job yourself.