Guide: How to Disconnect a Spray Hose from a Delta Faucet (2023)

This post may contain affiliate links. If you use these links to make a purchase, we may earn a small commission. Thanks.

Delta's wide range of faucets has made it a top supplier and it is the use of recirculating spray hoses that sets it apart from its competitors.

However, the spray hose is often the source of complications such as leaks and may need to be disconnected to allow replacement.

If you're wondering how to disconnect a spray hose from a Delta faucet, we've got you covered.

In this article, we provide a step-by-step guide to the disconnection process that will save you the hassle and expense of hiring a professional plumber.

You can save a lot of time and money if you do it yourself.

How does the faucet spray system work?

Before successfully completing the procedure, you must first understand the connection between the faucet and the shower hose, that is, how the faucet spray system works.

It is important to note that most faucets are sold with the spray directly attached and the spray is powered by water pressure and gravity. The parts are not visible, they are hidden under the sink or in the body of the hose.

The working end of the syringe is in the tube. Water enters the shower hose from below after passing through the faucet. A diverter is included at the base of the hose; This is a plastic collar that attaches to the hose when you turn on the faucet controller.

Releasing the sprinkler trigger means the water supply to the sprinkler head cannot exit the spout, causing the collar to rise to equalize backflow. For the sprayer to work, the tap must be open; remember that the spout can be closed by the pressure of changing the direction of the water flow.

What Kind of Delta Kitchen Faucets Have a Spray Hose?

Now that you have a better understanding of the relationship between the faucet and the sprayer hose, you should be able to disconnect the sprayer head with ease. However, before starting to disassemble the sprayer, it is important to identify the type of faucet you are working with.

The Delta style kitchen faucet comes in three main types, each equipped with a spray hose. It is important to point out whichDelta Type Kitchen FaucetYou have, because this knowledge will help you carry out the process.

Model with two handles in the middle

• It can be identified by its distinctive set of two handles.
• It has faucet and shut-off controls located along the sink.
• The vegetable sprayer can also be found in the same line as the faucet and valves.

generalized kitchen faucet

• Recognizable by its unique handle.
• Unlike the kitchen faucet in the middle, it has a separate vegetable sprayer.

Pull-out single lever kitchen faucet

• Comes with a single sleeve.
• The difference here is that the faucet spout and the vegetable sprayer are connected.

Identifying the faucet style is the first step to a successful procedure. If you've never tried to disconnect the sprayer hose before, familiarizing yourself with the model is a good place to start.

Disconnecting the spray hose can seem like a daunting task at first, but it's actually relatively easy once you know the right tools. It is recommended that you gather all your tools before you begin; That way, you'll have them all on hand when you need them.

All tools and replacement parts can be found at the hardware store, although it's always good to check that you already have them before you buy. Professional plumbers use the same tools when carrying out the procedure, but doing the job yourself can save you a significant amount of money.

You will need a new spray head and spray hose to replace the defective parts and an adjustable wrench to help you loosen the spray hose nuts. A sink wrench may also be required if your sink design calls for it.

It is also important to have pliers handy as they are useful for tightening the rod connection. A screwdriver will help you to remove the spray head, while a pocket knife can help you to loosen the C-clip.

To successfully complete the procedure, you must be able to see what you are doing under the sink. Therefore, a flashlight is an indispensable tool in this process, allowing you to focus all your attention on the task at hand.

You need:

• a new spray head and hose to replace the defective parts
• an adjustable wrench to help you loosen the spray hose nuts
• a sink faucet if the sink design requires it
• pliers. These are useful when tightening the rod connection.
• a screwdriver to help remove the sprinkler head
• a pocket knife to help you release the C-clip.
• a flashlight to help you see under the sink.

Steps to Disconnect a Spray Hose from a Delta Faucet

1. Disconnect the water supply lines and drain the water

Turn off the water valve controller to shut off the water supply. Not only is it impossible to complete the task while the valves are on, it is also extremely inconvenient, as you will be covered in water.

Drain any remaining water from inside the nozzle and spray hose. For this, you can leave the syringe rotating, which facilitates the loosening of the nuts. Place a bucket under the spray hose to collect any drops that fall while working.

2. Unscrew the nuts and remove the hose.

Identify the outlet tube under the discharge unit and locate the connecting spray hose. If you find a clamp that connects the hose and tube, you will need to unclip it and keep it.

Position a bucket to allow water to drain from the hose and loosen the nuts. Use the adjustable wrench to complete this step and turn it counterclockwise until the nuts are loose and can be unscrewed by hand. If necessary, you must loosen the nuts for a bolted connection with a sink wrench.

After unscrewing the nuts, you can now disconnect the spray tube from the Delta tap. Simply loosen the deck adjustment nut with a screwdriver and pull the opposite side.

3. Remove the spray head

Turn the sliding nut counterclockwise and the spray head will separate from the hose.

You may find that mineral deposits have built up on an older sprinkler. If that's the case, water and white vinegar can be mixed together to make a cleaning solution. Dipping the head in the solution facilitates removal. After that, you can simply remove the spray head and store it away for safekeeping.

With a pull-out tap, you must bend the spray hose after you pull it out. With an easily detachable connection, the syringe can be disconnected with the push of a button.

4. Check for leaks and replace defective parts

Inspect the spray hose and spray head for signs of leaks orfaucet corrosion. If you discover leaks in the stem connection, use a pelvic wrench or pliers to tighten them. However, if the leak persists, it is recommended to replace the sprayer hose.

You can order replacement parts if your faucet is under warranty. To do this, contact the provider's customer service team directly. However, if the warranty has expired, you will need to get the parts yourself. Take the broken pieces to the hardware store and buy an identical model.

5. Reassemble and reattach the spray head

Now that you know how to disconnect the spray hose from the Delta faucet, it's time to put it back together!

After disconnecting the syringe tube and purchasing replacement parts or a new syringe tube, you can now place the replacement platform fitting where the old one was. Use a screwdriver to secure it with nuts under the sink and insert the replacement hose into the deck support.

Reconnect while wrapping the pipe tape around the male threads and attach the hose to the faucet stem to complete the process. By following the correct steps with the best tools for the job, you will now be able to disconnect the spray hose from the Delta Faucet.

final thoughts

Now that you know how to disconnect the Delta faucet spray hose, the next time you have problems with your sprinkler heads or base leaks, you might want to try it yourself.

You can't go wrong by following our guide, but don't hesitate to contact a plumber if you're not sure how to do the job yourself.