Nobody said it would be easy – at least not always. The truth is that you've probably already taken care of the pool because of those beautiful sunny days when you see yourself floating on your back and the light penetrating through your closed eyelids. Maybe you even enjoy throwing a summer party or two. But like it or not, maintenance allows for all of our happy pool memories, and a pool cover pump is essential to keeping your pool in pristine condition. Fortunately, it's fairly easy to troubleshoot a tire pump when it starts to fail. By solving some of the common problems - like turning the pump on and off, running it without draining the water, not turning it off when it should, or not turning it on at all - I'll make sure everything is set up to love your pool again. Trust me, you'll be slathering on sunscreen in no time.
If you already know you need an upgrade, thenGenius IQ 800 GPH Pool Cover Pumpruns automatically and reliably, reduces monthly operating costs over the season, and comes with a one-year warranty.
Firstly, why do I need a tire pump?
So you haven't had many sunny days lately. Sorry. Whether it's during the winter months when the pool is closed, or during an exceptionally severe storm, a pool cover prevents rainwater, snow and/or debris such as leaves, twigs and other debris from falling directly into the pool. Instead, all items that are not suitable for the pool will be on the pool cover. But I have bad news: there is a weight limit that a pool cover can support. If left alone, it will eventually sink into the pool, taking all the water and debris with it. Talk about counterintuitive.
Hence the pool cover pump. This little device sits on the pool cover and sucks up all the heavy water. In other words, your salvation is keeping your cover safe. It also acts as a sort of safety net should a child or pet fall into it, avoiding costly maintenance. You don't want to have such a mess that you need professional help, but without a tire pump, that will be your reality—and there's no better reality check than writing a big check.
If you care about minimizing unnecessary expenses, it's time to replace your pool's main pump with one that works more accurately, includes a warranty and significantly reduces your running costs. ThatPays for itself in energy savings in less than two years.
I just need to figure out which part is broken and replace it...okay?
Well, that's weird. First, check the warranty. Is it to your advantage? If not, I have something to say that you don't want to hear. The truth is: many parts of tire pumps cannot be replaced. If the product you purchased does not come with a warranty and the part you need is not on the market, you will need to purchase a new shield pump.
If you are out of warranty or prefer to troubleshoot the problem yourself before sending your pump in, try some of these do-it-yourself maintenance checks. Don't worry - they're simple, easy to make and won't interfere with the pump that covers the pool. There is no risk of voiding the MacGuyver warranty here.
Pump turns on and off intermittently
If your pump turns on and off intermittently, there are a few steps to take. First, make sure the device is properly connected to the power supply. A partially connected device may be the simplest explanation.
If the pool cover pump is automatic, it has sensors that measure the amount of water to cover the pool and then turn it on. Make sure the pump is balanced and in the center of the cover. If the device is tilted to the side, the automatic sensor may receive mixed signals.
None of these questions apply? Try the oldest trick in the book: Clean the tire pump volute, the funnel-shaped part that sucks. While many tire pumps are designed to keep out contaminants such as leaves and twigs, some can get into the pump over time and clog it, making it ineffective.
Are you looking for the most powerful and durable device on the market? ThatSunnora Pool Cover Pumpmoves 1,500 gallons per hour with automatic detection. It also has a very large built-in lid, so you probably don't even need the included one-year warranty.
The pump does not turn on at all
So you've plugged in the pump and turned it on, and the results are zero. If the pump does not turn on, it may not be the pump's fault. Check your power source. Many outdoor outlets have their own circuit breakers - you may need to turn yours off.
If not, try cleaning the pump cover coil - the same way as if you turned the pump on and off occasionally. In case of severe clogging, the shield pump may flatten.
Pump turns on but does not discharge water
OK, so the pump turns on, but it does nothing but increase your energy bill. Even worse, your engine is at risk of wear and tear.
In most cases, this indicates a clogged pump. You'll want to check every part of the pump that you can access: the volute (including the drain hole, which is a small rubber band-sized hole on the inside edge), the strainer, and the tubing.
The pump works for a long time
If left untreated, this problem can also increase energy costs and overheat the tire pump motor. First, check the tire pump switch to make sure it's not clogged. A good way to do this is to unplug the pump, flush the switch with clean water, and plug it back in.
If that doesn't work, it's possible that a phenomenon called reflux is the catalyst for this problem. If the hose leads higher than the tire pump itself, especially by a significant amount, water can flow back into the pump, creating an endless cycle. Move the other end of the hose – the one not connected to the shield pump – to a slightly lower discharge point. Are you still driving for a long time? Hose adapter and check valve may be required.
If you already have these two pieces, make sure they are clean. If all is well and the pump shows no improvement, you may need to purchase a new check valve.
If these methods don't work and the weather forecast isn't in your favor, try again.Genius IQ 800 GPH Pool Cover Pump. It works and ships quickly to protect your pool from all that heaven has to offer. (And I mean fast.)
Prevention is better than cure
I know this time is a little late for prophylaxis. But it's time to do yourself a favor in the future and get your tire pump serviced. No offense, but I hope I don't see you on this site for too long.
Frequently remove dirt from the pump and remember to periodically clean the water where it is located. Clogging can explain any of the above problems.
Take your tire pump indoors in subzero temperatures. Either way, you don't want it soaking up snow or ice - see clogging mention above.
Make sure the pump is upright and balanced. It works best in the middle of the pool cover, where the most water collects.
It wasn't so bad, was it? Now that you've sorted your AWOL pool cover pump, you can be confident that when the time comes to reopen your pool, it will be ready to go - without expensive maintenance costs. It's easy to remember why you wanted a pool, right?
Remember, the pool cover pump is designed to displace water, not snow. Use a large, sturdy brush like this one.Swimming pool brush with 360 degree bristlesto remove ice accumulated in the lid.
Find the right pump for you
ah ah Have you tried everything mentioned above and your pump still malfunctions? Maybe it's time to go back to square one. meetperfect tire pumpfor you (and believe me: buy one with a guarantee).
This articleexplains how to use the pool cover pump. Want to know if pool cover pumps are submersible? Find out morewhether.